Name: CO-60S split hydraulic crimping machine
Type: CO-60S
Details:
＃ purposes: CO-60S Split hydraulic crimping machine (tonnage) is a recently developed efficient practical hydraulic crimping tool. It uses the hydraulic power to promote increased lower mold, when the upper and lower mold contact, crimp completed. Applicable to 110KV overhead resistant sleeve and underground cable crimp.
＃ Features: 1. Largest steel and aluminum terminal bushing Φ55mm, the largest steel casing Φ36mm, crimp wide, the number of small, can be controlled elongation, reduce deformation. 2 double acting hydraulic cylinders can avoid the spring fatigue reset the problem of slow. Piston reset time can be shortened.
＃ Equipped with hydraulic pump: tubing hydraulic electric pump with single the ZCB-7000B or EHP-63A.
＃ Optional mold: aluminum mold: 26,28,30,32,34,36,40,45. Steel mold: 10,12,14,16,18,20,22,24. Random pair with mold.
＃ Packing: wooden box
＃ Technical parameters:
Output (T): 60T
Crimping capacity (mm): Φ16-Φ55
Piston stroke (mm): 38.5
Size (mm): 340X140
Weight (kg): 21.5
¢ 3 meter wired remote control, solenoid valve control. ¢ output can control piston can be returned at any location. ¢ carbon brush electric small size and light weight. ¢ with a pressure gauge, the working pressure can be adjusted.
1, Model: CTE-25AG
Rated working pressure: high pressure 70MPa low pressure 7MPa
3, high pressure / low flow: 0.6L/min 3.5L/min
4, motor power: 600W
5, voltage: 220V
6, current: 3A
7 Frequency: 50Hz
8 speed: 1400r/min
Dimensions: 26 × 18 × 38CM
10 oil storage capacity: 4L
11, Weight: 15 kg
Function Description
The CTE-the 25AG series of electric pumps single-phase asynchronous motors, solenoid valves, high pressure pumps, tanks composed of ultra-high pressure oil pump with a small volume, high pressure, light weight, simple structure, the advantages of wired remote easy to use.
2, the pump in order to work pressure can be observed at any time to change, and ad hoc pressure gauge, so that users always observe the changes in the work. Control switch according to user needs, with manual switch or footswitch. With a pressure relief valve and solenoid valve
Features: high and low voltage out of fuel fast turbine blade suction up the most significant amount of oil.
4, the pressure relief valve overload protection device to avoid overloading destruction or excessive pressing 700kg/cm ² automatic pressure relief
5, the tubing can be any enough lengthened, with quick connectors. Before leaving factory equipped with high-pressure tubing: Φ16 × 2 meters a.
Tubing connector with 3/8 "thread.
7, double pump single oil line |
