First, use:
Portable three-in copper processing machine power system electromagnetic valve electric hydraulic pump for light, fast, efficient, durable, two-way foot switch control method is mainly used for processing all kinds of copper, aluminum bus. Users simply select the appropriate processing unit can be bus punching, cutting, bending, high production efficiency, is the switchgear, transformers and other electrical equipment manufacturing industry, the ideal necessary.
Second, the main features:
1, the machine has a red, cut, folded (flat curve) three processing units, respectively for bus punching, shearing, bending. By adjusting the quick-change connectors, three units can be switched between.
2, machine operation is simple, flexible, general-skilled workers can easily be used operations.
3, washed, cut, fold the processing unit uses vertical machining methods. Operating flexibility, can also be combined or split to use electricity on-site repair help.
4, the CH-70 hydraulic punching machine, CWC-200 hydraulic cut row machine, CB-200A hydraulic bending row machine, CTE-25AS pump light electric solenoid valve composed of four parts, you can selectively mix:
Name: CH-70 hydraulic punching machine
Copper / aluminum: 12mm
Iron / steel: 10mm
Tonnage: 35T
Throat depth: 110mm
Weight: 30kg
Standard mold configurations: 3 / 8 "(§æ10.5mm), 1 / 2" (§æ13.8mm), 5 / 8 "(§æ17mm), 3 / 4" (§æ20.5mm)
Non-standard mold §æ5.5mm, §æ6mm, §æ6.5mm, §æ7mm, §æ7.5mm, §æ8.5mm, §æ9mm, waist round 7 * 11 9 * 13 11 * 17 13 * 21 17 * 24 and so on ( can be optional)
Hydraulic punching tool function:
1. Separate hydraulic punching machine for L, H flat steel, steel aluminum row of punching.
2. Block the bottom of the design of flat, smooth not shake down.
3. Single-hole back to the oil, the use of high-carbon tungsten alloy steel mold can not be broken.
4. CH-70, CH-60 split hydraulic punching device, designed for angle iron, flat iron, copper and other sheet metal punch, especially for electricity, construction and other industries operating in the field site.
5. With pump: CP-700 DYB-63A CTE-25AS pump factory without an additional purchase.
For other specifications mold, can be ordered separately.
¡ñ The machine is used for punching bus installation dedicated equipment required to complete the pump (hand pump, foot pump, pump).
¡ñ light weight, can be different according to the design specifications of punching holes.
¡ñ busbar punching of no glitches, no distortion, consistent with national standards, similar products second to none.
Name: CWC-200V machine hydraulic cut row
Output: 20T
Width: 200mm
Maximum thickness: 12mm
Weight: 32.5
Copper, aluminum row cutting tool function:
1 This product is suitable for switch boxes, switchboards, automatic control panel wiring project.
(2) the use of separate, easy to carry.
3 rows of copper and aluminum center to align the center of the piston can be cut off.
4 off, the incision is not smooth deformation.
5 can be equipped with manual pump or electric pump to use. (Split products, the factory without pump)
¡ñ The machine is cutting copper and aluminum bus bar of the special tools required to complete the pump (hand pump, foot pump, pump), no dust, no noise.
¡ñ the use of alloy steel cutter grinding, and after heat treatment, fracture smooth and tidy, smooth and no distortion, no burr, cutting speed and a smooth surface no longer correct.
Copper cut the curved copper scrap;
The machine is equipped with the ruler, pull to limit the width of copper, so copper flat
Name: hydraulic bending machine CB-200A row
Output: 20T
Width: 200mm
Maximum thickness: 12mm
Weight: 24kg
Copper, aluminum row bending tool function:
1 row of curved copper lined aluminum bending angle 90 degrees, without damaging the copper material.
2 This product is flip, when bending long copper, N-type or L-type card can be split out, you can row out unimpeded.
3 angled design provides 90 degrees, 45 degrees indicating, to avoid excessive.
4 bent copper must pay attention to the center of copper, must be at the scale 0 degrees.
5 with Pu CFP-800, CP-700, DYB-63A, ZCB6-5 and other products.
(Split products, the factory without pump)
¡ñ The machine is a flat bend copper, aluminum bus bar of special hydraulic equipment, the need to support the pump (hand pump, pump, foot pump).
¡ñ be able to bus in the vertical plane bending 0 ~ 135 °.
The bending of copper, aluminum row maximum size of 12mm × 200mm;
¡ñ Equipped with scale read out the bending angle.
¡ñ supporting the use of flat, not to hurt the bus.
¡ñ The bending angle in line with national standards.
|
